Overview
A lightweight wired mobile controller that connects via a movable Type-C connector inserted directly into the mobile port. It requires no pairing and no battery, as it is powered by the mobile device itself. It has three input modes distinguished by the indicator light color, featuring Hall Effect sticks, cushioned membrane buttons and triggers, Turbo function, and swappable silicone pads to fit the phone's thickness and case, with support for pass-through charging.
Features as stated in the official manual:
- Hall Effect sticks with non-contact magnetic sensors that do not wear out or drift with use.
- Lightweight and ergonomic design weighing 135.4 grams to prevent fatigue during long gaming sessions.
- Cushioned and durable membrane buttons and triggers designed for comfort and quiet operation.
- Three input modes: Switch mode in red, Android mode in dark blue, and Direct Touch mode in light blue.
- Turbo function on buttons A, B, X, Y, LB, RB, LT, and RT.
- Swappable silicone pads of different thicknesses on both sides of the port to fit phones with or without a case.
- Pass-through charging support, allowing you to charge the phone and play at the same time.
Device Layout and Button Names
- Front side: View button, Menu button, A, B, X, Y buttons, M button, and indicator.
- Top edge: LB and RB buttons, LT and RT triggers.
- Bottom edge: Type-C charging port and Type-C connector.
Specifications
| Item | Detail |
|---|---|
| Supported platforms | Android devices and other devices according to the official manual page |
| System requirements for wired connection | Android 8.0 or later with direct connection, and Windows 10/11 systems |
| Connection method | Wired via a movable Type-C connector integrated into the controller |
| Mobile size | Length from 105 to 213 mm |
| Weight | 135.4 grams |
| Battery | No battery, controller is powered directly by the mobile |
| Standby mode | After ten minutes of inactivity |
| Supporting software | GameSir app |
Box Contents
| Item | Detail |
|---|---|
| Controller | 1 piece |
| Short thick silicone pad | 2 pieces |
| Short thin silicone pad | 2 pieces |
| Long silicone pad | 1 piece |
| Blanking silicone pad | 2 pieces |
| Manual | 1 copy |
Mobile Requirements
| Item | Detail |
|---|---|
| Operating system | Android 8.0 or later |
| Connection method | Direct connection via Type-C port |
| Mobile length | From 105 to 213 mm |
| Phone case | No numerical limit mentioned for thickness; case is accommodated by swapping silicone pads |
Connection and Operation
Mounting the Mobile and Connecting
- Connect the movable connector on the controller to the mobile port.
- Open the controller by pulling its two sides and place the phone between them.
- Close the controller onto the phone to complete the connection.
- Some Android devices require enabling the direct connection feature in the device settings for the controller to be powered and function.
Operation and Standby Mode
- The controller operates automatically when connected to the mobile via the movable connector.
- If ten minutes pass without use while the controller is connected, it will turn off automatically.
- To wake the controller from standby, press one of the A, B, X, or Y buttons, or the Logo button.
Installing Silicone Pads
- There are swappable silicone pads on both sides of the port; the pad thickness can be chosen based on the device.
- When installing, place the thicker side of the pad upward and the thinner side downward.
- For devices without a protective case: use the thick pads.
- For devices with a protective case: use the thin pads or the blanking pads.
- Ensure the pad edges are stable on the controller body so they do not fall off.
Platforms and Input Modes
| Platform | Mode | Indicator | Switching Method |
|---|---|---|---|
| Android and Apple devices | Switch mode | Red | Press View and Menu buttons for 2 seconds to toggle between Switch and Android mode |
| Android devices | Android mode | Dark blue | Press View and Menu buttons for 2 seconds to toggle between modes |
| Android devices | Direct Touch mode | Light blue | Via GameSir app |
The combination of View and Menu buttons toggles only between Switch mode and Android mode; switching to Direct Touch mode is done via the app.
No name for this controller appears in the Bluetooth list in the official source, nor are there Bluetooth pairing steps, as it is a wired controller with no Bluetooth.
Indicator States
| State | Meaning |
|---|---|
| Connection successful | Indicator remains steady |
| Connection unsuccessful | Indicator flashes for 30 seconds then turns off |
| Switch mode | Red |
| Android mode | Dark blue |
| Direct Touch mode | Light blue |
| Button layout swap success | Flashes white twice |
| Entering calibration mode | Flashing indicator |
The indicator is on the front side.
Some Android devices require enabling the direct connection feature in device settings for the controller to be powered and function.
No charging table for the controller itself is provided in the official source because it has no battery.
Button Combinations
| Function | Combination | Description |
|---|---|---|
| Mode switch | View button + Menu button | Toggle between Switch mode and Android mode |
| Activate Turbo | M button + Target button | Hold M button then press the target button; adjustable buttons are A, B, X, Y, LB, RB, LT, and RT; repeating the process cancels Turbo for that button |
| Clear all Turbo settings | M button + Logo button for 2 seconds | Clears Turbo from all buttons |
| Swap button layout | M button + a face button for 2 seconds | Swaps A/B and X/Y values; white indicator flash twice means success |
| Adjust volume | Logo button + D-pad Up/Down | Increase/decrease system volume in Android mode only |
| Screenshot | Two quick presses on M button | Activates screenshot; holding after the two presses performs the corresponding continuous function |
Turbo
- Adjustable buttons are A, B, X, Y, LB, RB, LT, and RT.
- To activate Turbo: Hold the M button then press the button you want to activate Turbo on.
- To cancel Turbo from one button: Repeat the same process on the same button.
- To clear all Turbo settings: Press the M button and Logo button for 2 seconds.
Pass-Through Charging
The controller supports pass-through charging, allowing you to play and charge the phone simultaneously via the charging port on the bottom edge.
If charging fails to pass through to the phone: enable the direct connection feature in the phone settings, change the order of connecting the charging cable to the controller, use a charger that supports fast charging standards up to 9V and 3A, or replace the cable.
The controller accepts a maximum input of 9V and 3A; the mobile and charger must both support version 2.0 or later of the fast charging standard.
The actual charging power reaching the phone remains governed by the limits of the phone's own system.
Calibration
- Connect the phone to the controller, then hold the Menu, View, and Logo buttons for three seconds until the indicator flashes, which means entering calibration mode was successful.
- Rotate the sticks at their maximum angle three times and let them return to their original position naturally.
- Press button B to finish calibration and exit, according to the official manual.
- Keep the calibration movement speed constant to avoid errors in recorded data, and do not perform calibration if the sticks are working normally.
- Note: The FAQs on the same page mention another format: hold View, Menu, and Logo buttons for two seconds, then rotate the sticks three times and press the triggers three times, then press button A to save and exit.
Reset
There is no button combination to reset the controller according to the official manual page.
- Refer to the GameSir app to reset the configuration file.
- Press the controller icon area on the main interface.
- Press Restore Default Settings.
- Press Confirm, and the controller's configuration file will return to factory settings.
Supporting Software and Firmware Update
- Access the GameSir website from your mobile or scan the QR code printed in the manual to download the GameSir app.
- Use the app to update the firmware, adjust controller settings, and reset the configuration file.
- Switching to Direct Touch mode is also done from the app.
- To revert to a previous firmware version: from the app's main page, press the controller icon, enter the firmware update page, choose other versions, then select the previous stable version.
Frequently Asked Questions
What devices are supported?
Apple and Android devices with a Type-C port, ranging from 105 to 213 mm in length.
Is the connection wired or wireless?
Wired direct connection via an integrated Type-C port, providing very low latency.
Does it have a battery?
No, it is powered directly by the mobile and does not contain a battery.
Does it support pass-through charging?
Yes, you can play and charge the device at the same time.
What are the stick features?
Hall Effect sticks work with non-contact magnetic sensors, so they do not wear out or drift.
Does it have analog triggers?
No, the triggers are cushioned and durable membrane, designed for comfort and quiet operation.
How do I switch between Xbox and Switch layout?
Press M button + A button for 2 seconds.
Does it have Turbo?
Yes, and the buttons that accept it are A, B, X, Y, LB, RB, LT, and RT.
How much does the controller weigh?
About 135.4 grams; this lightweight design prevents fatigue during long sessions.
Buttons are constantly pressed on their own
Turbo function is active. Press M button + the desired button to cancel Turbo from it alone; to clear Turbo from all buttons on this controller, press M button + Logo button for 2 seconds.
Pass-through charging is not working with my phone
Enable direct connection in phone settings, change the charging cable connection order, use a charger supporting fast charging up to 9V/3A, or replace the cable. The controller accepts 9V/3A; the phone and charger must both support version 2.0 or later of the standard.
Android phone is not connecting and the indicator flashes or does not light up
Ensure the connector is fully inserted, remove the phone case if installed, enable direct connection in phone settings, and enable USB debugging. If the problem persists, try the controller with another phone.
iPhone does not respond in games
Press View + Menu buttons together for more than two seconds until the indicator changes to another light state; the color varies by model, so refer to the modes table in this manual.
Why does the device not appear in the app on Apple devices?
This controller is not supported within the app on Apple systems, so it does not appear, and layout customization or game libraries are not available, as Apple has restricted controller customization since iOS 13.4. You can still run games that natively support controllers via direct connection.
The stick drifts or does not work properly
Perform stick calibration according to the calibration section in this manual, noting that the official manual and its FAQ mention two different formulas for the combination and exit button.
How do I turn off or dim the indicator light?
Hold M button + Menu button for five seconds according to the answer posted on the official manual page.
How do I reset the controller?
There is no button combination for resetting; do it from the GameSir app: press the controller icon area on the main interface, then press Restore Default Settings, then press Confirm.
Documentation Notes
- Stick calibration steps in the manual mention pressing Menu, View, and Logo buttons for three seconds then rotating sticks three times then pressing button B to exit, whereas the FAQ on the same page mentions holding View, Menu, and Logo buttons for two seconds then rotating sticks and pressing triggers three times then pressing button A to save and exit.
- The FAQ mentions pressing triggers as part of calibration, even though the same FAQ states the triggers are membrane.
- Clearing Turbo is mentioned in the manual and combination table as pressing M + Logo for two seconds, while the general FAQ answer on the page starts by mentioning two quick presses on the M button then corrects itself to mention the M + Logo combination for this controller.
- The first platform row in the manual mentions Android and Apple devices, while the manual page mentions Android and other devices.
- The specifications table mentions Windows systems, but they are not in the manual's platforms and modes table.
- There is no button combination to reset the controller per the official manual page; resetting is done via the app only.
- No name for this controller appeared in the Bluetooth list in the official source, nor were there Bluetooth pairing steps.
- The phone case thickness limit was not mentioned in the official source; the case is handled by swapping silicone pads.
- No charging table for the controller itself is in the official source because it has no battery.