Overview
A wired mobile controller that connects via a movable Type-C connector that plugs directly into the mobile port. It does not require pairing or a battery because it is powered by the mobile itself. It has three input modes distinguished by the connection status indicator color, and it features Hall Effect sticks and triggers, a turbo function, and a hair trigger mode.
Features
- Hall Effect sticks with non-contact magnetic sensing to prevent stick wear and drift.
- Hall Effect analog triggers with 100% response area and constant smoothness, with quick switching to hair trigger mode.
- Three input modes: DS5 mode in white, HID mode in blue, and Direct Touch mode in sky blue.
- Adjustable turbo on A, B, X, Y, LB, RB, LT, and RT buttons, and the setting remains after a restart.
- Face button layout swap: Swap the values of buttons A and B and buttons X and Y from the controller or the companion software.
- No battery: A wired controller powered directly by the mobile and does not require charging.
Specifications
| Item | Detail |
|---|---|
| Supported Platforms | Android 8.0 or later devices according to the official manual |
| Connection Method | Wired via a movable Type-C connector built into the controller |
| Mobile Size | Length from 110 to 168 mm |
| Mobile Case Thickness | 1 mm or less |
| Battery | No battery, the controller is powered directly by the mobile |
| Standby Mode | After ten minutes of non-use |
| Companion Software | GameSir App |
Device Layout and Button Names
| Position | Buttons and Ports |
|---|---|
| Front Face | A, B, X, Y buttons, G button, S button, and connection status indicator |
| Top Edge | LB and RB buttons, LT and RT triggers |
| Bottom Edge | Type-C connector, Type-C charging port |
Box Contents
| Item | Detail |
|---|---|
| Controller | 1 piece |
| Silicone convex stick cap | 2 pieces |
| Silicone concave stick cap | 2 pieces |
| User Manual | 1 copy |
| Thank You and After-sales Service Card | 1 card |
| Certificate of Conformity | 1 copy |
Mobile Requirements
| Requirement | Value |
|---|---|
| Operating System | Android 8.0 or later according to the official manual |
| Connection Method | Direct connection via Type-C port |
| Mobile Length | From 110 to 168 mm according to the product page and FAQ |
| Mobile Case Thickness | 1 mm or less according to the product page |
Connection and Play
- Connect the mobile to the controller via the movable connector provided on the bottom edge.
- Open the controller by pulling its sides and place the mobile between them.
- Release the controller to grip the mobile and complete the connection.
- A steady connection status indicator in white means the connection is successful according to the official manual.
- Some Android devices require enabling the direct connection feature in device settings for the controller to work.
- After connecting, check the indicator color according to the official product page: solid blue for Android devices and solid white for Apple devices. If the required color does not appear, press the G button and the S button to switch between modes.
Standby and Wake-up
- If ten minutes pass without use while the controller is on, it will go into standby mode.
- To wake the controller from standby, press one of the A, B, X, Y buttons or the Logo button.
Input Modes
The selected mode remains saved after a restart. Switching to Direct Touch mode is not done by a button combination, but rather from the app according to the official manual.
| Mode | Indicator Color | Switching Method |
|---|---|---|
| DS5 Mode | White | Press G button and S button for 2 seconds |
| HID Mode | Blue | Press G button and S button for 2 seconds |
| Direct Touch Mode | Sky Blue | From the GameSir app |
Indicator States
| State | Indication |
|---|---|
| Solid White | DS5 mode, which is the successful connection color according to the official manual, and the color for Apple devices according to the official product page |
| Solid Blue | HID mode, which is the color for Android devices according to the official product page |
| Sky Blue | Direct Touch mode |
| Rapid blinking of connection status and charging indicators | Entering calibration mode |
Connection status indicator on the front face.
Button Combinations
| Function | Combination |
|---|---|
| Enable or disable hair trigger mode, setting remains after restart | Screenshot button with LT or RT trigger for 2 seconds |
| Set Turbo on that button; adjustable buttons are A, B, X, Y, LB, RB, LT, and RT | Screenshot button with the desired button |
| Clear Turbo from all buttons | Screenshot button with Logo button for 2 seconds |
| Swap A/B and X/Y button values, setting remains after restart | Screenshot button with A button for 2 seconds |
| Increase or decrease volume, not available in DS5 mode | Logo button with D-pad up or down arrow |
| Switch input mode, setting remains after restart | G button with S button for 2 seconds |
Turbo
- Adjustable buttons are A, B, X, Y, LB, RB, LT, and RT.
- To enable Turbo: Press and hold the Screenshot button, then press the button you want to set Turbo on.
- To cancel Turbo from one button: Press and hold the Screenshot button, then press the button where Turbo was set.
- To clear Turbo from all buttons: Press the Screenshot button and the Logo button for 2 seconds.
- The Turbo setting remains saved after a restart.
Calibration
- Connect the mobile to the controller, then press and hold the G button, S button, and Logo button for three seconds until the connection status and charging indicators blink rapidly; this means entering calibration mode.
- Rotate the sticks to their maximum angle three times and let them return to their original position naturally.
- Press the triggers to their maximum travel three times and let them return to their original position naturally.
- Press the A button to finish calibration and exit the mode.
- Perform the calibration movement at a steady speed and gently so that no error occurs in the recorded data. Do not calibrate if the sticks and triggers are working normally.
Companion Software and Firmware Update
- Access the GameSir website from your mobile or scan the QR code printed in the manual to download the GameSir app.
- Use the app to update firmware, test buttons, and adjust stick and trigger zones.
- The app also allows for adjusting the dead zone of the sticks and triggers, swapping face button layout, and choosing between analog trigger and hair trigger mode.
Safety Warnings
- The product contains small parts, keep it out of reach of children under three years old, and seek immediate medical attention if a part is swallowed or inhaled.
- Do not use the product near fire, do not expose it to direct sunlight or high heat, and do not leave it in a humid or dusty environment.
- Do not expose the product to shock or drop it, do not touch the port directly as this may cause failure, and do not bend or pull the cable parts forcefully.
- Clean the product with a soft, dry cloth; do not use chemicals such as benzene or solvents.
- Do not disassemble, repair, or modify the product, and do not use it for other than its intended purpose. The company is not responsible for accidents or damages resulting from use other than its intended purpose.
- Do not look directly at the light emitted from the product as it may harm the eye. If there is a quality observation, contact GameSir or the local distributor.
Frequently Asked Questions
What mobile devices are supported?
The official FAQ page mentions iPhone 15 series and Android devices with a length between 110 and 168 mm, while the official manual is limited to Android 8.0 or later.
Does it have a battery?
No, it is a wired controller powered directly by the mobile and does not require charging.
What are the features of the sticks?
Hall Effect sticks working with non-contact magnetic sensors, so they do not wear out or drift with use.
Does it have analog triggers?
Yes, Hall Effect analog triggers with 100% response area and constant smoothness, with quick switching to hair trigger mode by pressing the screenshot button with the trigger for 2 seconds.
What games are supported?
Native Android games, cloud games, and game emulators.
How do I switch between Xbox and Switch layouts?
Press the screenshot button with the A button for 2 seconds. The layout can also be swapped from the companion software.
What does the companion software allow?
Adjusting stick and trigger dead zones, swapping face button layout, choosing between analog trigger and hair trigger mode, along with updating firmware and testing buttons.
The indicator does not show the expected color after connection
Press the G button and S button to toggle between modes until the required color appears: solid blue for Android and solid white for Apple devices according to the official product page.
The controller does not work after attaching the mobile
Some Android devices require enabling the direct connection feature in device settings for the controller to be powered and function.
Buttons are pressed continuously on their own
The Turbo function is enabled. Press and hold the screenshot button, then press the same button to cancel Turbo from it alone, or press the screenshot button with the Logo button for 2 seconds to clear Turbo from all buttons.
The stick drifts or the trigger does not work correctly
Connect the mobile to the controller and press and hold the G button, S button, and Logo button for three seconds until the indicators blink rapidly, then rotate the sticks three times and press the triggers three times, then press the A button to save and exit.
Documentation Notes
- The operating system is mentioned in the official manual as Android 8.0 or later only, while the product page mentions Android 8.0 or later with Apple system version 14 or later, and the FAQ page mentions iPhone 15 series and Android devices.
- The color for successful connection is mentioned in the official manual as solid white, and the modes table in it makes white for DS5 mode, blue for HID mode, and sky blue for Direct Touch mode, while the product page mentions that solid blue is for Android and solid white is for Apple devices.
- The duration to press the mode switching combination is mentioned in the manual table as two seconds, while the product page mentions it without a duration.
- The mobile length is printed on the product page in centimeters, which is a typo; the correct value is in millimeters as in the manual and FAQ page.
- The companion software name appears in two formats: GameSir app in the manual, and GameSir World in one of the FAQ answers.