Overview
A wired mobile controller with a built-in cooler, connecting to the phone via a movable Type-C connector. It features a cooling plate and a fan on the back to reduce phone heat during long gaming sessions. It has three input modes, distinguished by the mode indicator color, and includes Hall Effect sticks, micro-switch triggers, a 6-axis gyroscope, vibration motors in both grips, pass-through charging for the phone, and a headphone jack.
Features as stated in the official manual:
- Built-in cooler with a 900mm² cooling plate and a maximum effective cooling power of 12W, preventing the phone from overheating during long gaming sessions or in hot environments.
- Hall Effect sticks with non-contact magnetic sensors that do not wear out or drift, featuring anti-friction glide rings.
- Micro-switch triggers for faster response with an esports feel.
- Turbo function on buttons A, B, X, Y, LB, RB, LT, and RT.
- Built-in 6-axis gyroscope for motion control and increased precision.
- Vibration motor in each grip for an experience close to home game consoles.
- Detachable grip set that attaches to the back of the controller for a grip closer to home consoles, or can be removed to reduce weight.
- Magnetic face buttons; the four face buttons are detachable to swap their layout.
Device Layout and Button Names
- Front Face: G button, S button, A, B, X, and Y buttons, mode indicator, and charging indicator.
- Top Edge: Movable Type-C connector, LB and RB buttons, and LT and RT triggers.
- Rear Face and Bottom Edge: Cooler indicator, 3.5mm headphone jack, and Type-C port.
Specifications
| Item | Detail |
|---|---|
| Supported Platforms | Android devices and PC according to the official manual page |
| Wired Connection System Requirements | Android 8.0 or later, and Windows 10/11 systems |
| Phone Size | Length from 110 to 180 mm |
| Phone Case Thickness | 1 mm or less according to the official help center |
| Weight | 167 grams |
| Cooling Power | 900mm² plate with a maximum effective cooling power of 12W |
| Max Cooling Mode Requirement | Cable and charger supporting 9V and 3A (27W or more) |
| Companion Software | GameSir App |
Box Contents
| Item | Detail |
|---|---|
| Controller | 1 piece |
| Grip Set | 1 set |
| Faceted D-pad | 1 piece |
| Small stick cap | 2 pieces |
| Concave stick cap | 2 pieces |
| Type-C cable | 1 piece (2 meters long) |
| Carrying case | 1 piece |
| Manual | 1 copy |
| Thank you and after-sales service card | 1 card |
| GameSir sticker | 1 sticker |
| Certificate of Conformity | 1 copy |
Swapping Parts and Grip Set
The four face buttons are fixed with a magnetic design, allowing them to be removed and swapped between a layout with X on top, Y on the left, A on the right, and B on the bottom, and a layout with Y on top, X on the left, B on the right, and A on the bottom.
The grip set attaches to or detaches from the back of the controller easily; attaching it provides a grip close to home game consoles, while removing it reduces weight.
Phone Requirements
| Item | Detail |
|---|---|
| Operating System | Android 8.0 or later according to the official manual; the official help center adds Apple systems, version 14 or later |
| Phone Length | From 110 to 180 mm |
| Phone Case Thickness | 1 mm or less according to the official help center |
Connection and Operation
Phone Installation and Connection
- Align the Type-C connector with the phone port.
- Open the controller by pulling its sides and place the phone between them.
- Push the controller sides together to complete the connection.
- Some Android devices require enabling the direct connection feature in the device settings for the controller to be powered and function.
Powering On, Off, and Standby Mode
- To power on: Connect the device to the movable connector and the controller will operate automatically.
- To power off: Press and hold the Logo button for five seconds.
- If ten minutes pass without use while the controller is connected, it will power off automatically.
- To wake the controller from standby, press one of the A, B, X, Y, or Logo buttons.
Platforms and Input Modes
| Platform | Mode | Indicator | Switching Method |
|---|---|---|---|
| Android and Apple devices | DS5 mode | White | Press G button with S button for 2 seconds |
| Android devices | Android mode | Dark blue | Press G button with S button for 2 seconds |
| Android devices | Direct touch mode | Light blue | Via GameSir App |
The G button + S button combination toggles between the first two modes only; switching to Direct touch mode is done from the app.
No name for this controller in the Bluetooth list or Bluetooth pairing steps were mentioned in the official source.
Indicator Status
| Status | Meaning |
|---|---|
| Connection successful | Mode indicator remains solid |
| Connection unsuccessful | Mode indicator flashes for 30 seconds then turns off |
| Pass-through charging successful | Charging indicator remains solid |
| Controller powering the device, pass-through charging inactive | Charging indicator flashes for 10 seconds then turns off |
| Cooler is working | Cooler indicator remains solid |
The Mode indicator and Charging indicator are on the front face, and the Cooler indicator is on the back of the controller.
Some Android devices require enabling the direct connection feature in the device settings for the controller to be powered and function.
Button Combinations
| Function | Combination | Description |
|---|---|---|
| Switch Mode | G button with S button for 2 seconds | Toggle between DS5 mode and HID mode |
| Enable Turbo | Screenshot button + desired button | Adjustable buttons: A, B, X, Y, LB, RB, LT, RT. Double-pressing the Screenshot button clears all Turbo settings |
| Adjust Cooler Power | S button + D-pad Up or Down | Increase or decrease cooling power; requires a 9V/3A charger at minimum |
| Enable/Disable Pass-through Charging | S button + D-pad Right | Setting remains after restart |
| Adjust Vibration Intensity | Screenshot button + G or S button | Increase or decrease vibration intensity levels |
| Swap Button Layout | Screenshot button + A button for 2 seconds | Swap values of A/B and X/Y buttons |
| Adjust Volume | Logo button + D-pad Up or Down | Increase or decrease system volume in HID mode only |
Turbo
- Adjustable buttons are A, B, X, Y, LB, RB, LT, and RT.
- To enable Turbo: Press the Screenshot button + the desired button.
- To clear all Turbo settings: Press the Screenshot button twice consecutively.
Cooler and Pass-through Charging
Cooler and Indicator
- The cooler starts working automatically once the Type-C cable is connected to the controller.
- To increase or decrease cooling power: Press the S button + D-pad Up or Down.
- A solid cooler indicator means the cooler is working.
- Operating the cooler requires a charger with at least 9V and 3A. Max cooling mode requires a cable and charger supporting 9V and 3A (27W or more).
- If the cooler does not start automatically, change the connection order: Connect the charger to the controller port first until the fan starts, then attach the phone to the controller.
Pass-through Charging
When the device is connected to the controller, the phone can be charged via the power port on the bottom edge; the charging indicator shows a white light during charging.
To enable/disable pass-through charging: Press the S button + D-pad Right; the setting remains after restart.
A solid charging indicator means successful pass-through charging; flashing for ten seconds then turning off means the controller is powering the device but pass-through charging is inactive.
The controller accepts a maximum input of 9V and 3A; both the phone and charger must support version 2.0 or later of the fast charging standard.
Calibration
Stick Calibration
- Press the G, S, and Logo buttons together to enter calibration mode; the mode indicator flashing white means successful entry.
- Rotate both the left and right sticks to their maximum range three times.
- Press the A button to exit calibration mode; the mode indicator will return to the current mode color.
Gyroscope Calibration
- Place the controller horizontally on a flat surface.
- Press the G button with the Screenshot button until the mode indicator flashes red and blue.
- The mode indicator returning to the current mode color means calibration is finished.
Companion Software and Firmware Update
- Visit the GameSir website from your phone or scan the QR code printed in the manual to download the GameSir app.
- Use the app to adjust the gyroscope, test buttons, and update firmware.
- Switching to Direct touch mode is also done from the app.
- To revert to a previous firmware version: From the app home page, press the controller icon, enter the firmware update page, choose other versions, then select the previous stable version.
FAQ
What devices are supported?
Android devices and other devices ranging from 110 to 180 mm in length.
Is the connection wired or wireless?
Connection is via a Type-C port, which provides very low latency. Note: The specification table on the same page mentions Bluetooth, which is a contradiction within the source.
Does it have a battery?
No, it is a wired controller powered directly from the phone and does not require charging.
How do I turn the cooler on or off?
The cooler starts working automatically when the cable is connected to the controller; power can be adjusted by pressing the S button + D-pad Up or Down.
Does it support pass-through charging?
Yes, and it can be enabled or disabled by pressing the S button + D-pad Right.
What are the stick advantages?
Hall Effect sticks work with non-contact magnetic sensors so they do not wear out or drift, and they feature anti-friction glide rings for very smooth movement.
Does it have analog triggers?
No, the triggers have micro-switches for faster response with an esports feel.
What are the cooler advantages?
900mm² cooling plate with a maximum effective cooling power of 12W, ensuring the phone does not overheat after long sessions or in hot weather.
Does it have vibration motors?
Yes, a vibration motor in each grip for an experience close to home game consoles.
Does it have a gyroscope?
Yes, a built-in 6-axis gyroscope for motion control and increased precision.
What is the benefit of the detachable grip set?
They attach to the back of the controller or detach easily; attaching them provides a grip close to home game consoles, and removing them reduces weight.
Fast cooling mode is not working
Ensure the charger and cable support 9V and 3A or more, adjust the cooling power level according to the manual, then change the phone and charging cable connection order: Connect the charger to the controller port first until the fan starts, then attach the phone. Max cooling mode requires 9V and 3A (27W or more).
Android phone not connecting and indicator is flashing or not lighting up
Ensure the connector is fully inserted, remove the phone case if attached, enable the direct connection feature in phone settings (common in Xiaomi, Oppo, Vivo, Realme, and iQOO devices), and enable USB debugging. If the problem persists, try the controller with another phone.
Stick drifting or trigger not working correctly
Press the G, S, and Logo buttons together until the mode indicator flashes white to enter calibration mode, rotate the sticks to their maximum range three times, then press A to exit; the indicator will return to its normal color.
Buttons and sticks not working when connected to Apple device
This is caused by the AssistiveTouch feature being enabled on the device. Go to Settings > Accessibility > Touch > AssistiveTouch and disable it.
Customization in Direct touch mode feels laggy or unstable
The mode that Direct touch is based on has limits imposed by the connection protocol; its performance is slightly lower than other modes, which is normal behavior. If this affects gameplay, switch to software-based customization.
How do I revert to a previous firmware version?
From the app home page, press the controller icon, enter the firmware update page, choose other versions, then select the previous stable version.
Does overcharging damage the battery?
All GameSir controllers have overcharge protection; charging stops automatically when the battery is full, and the indicator usually turns off when fully charged.
Documentation Notes
- The specification table in the official manual mentions the connection method as Bluetooth, while the FAQ states the connection is via Type-C and the controller is wired.
- The title of the official manual describes the product as a wired mobile controller with cooling and a movable connector, which contradicts the mention of Bluetooth in the specification table.
- The specification table mentions PC among platforms and Windows systems among requirements, while the platform and mode table in the official manual is limited to Android and Apple devices.
- The mode with the white indicator is named "DS5 mode" in the official manual, and "Other devices mode" on the manual page.
- Some general answers posted on the page mention M, Menu, and View buttons for lighting adjustment or troubleshooting, but these buttons do not exist on this controller (buttons are G, S, Screenshot, and Logo).
- The name of the companion software appears in different formats on the same page.
- The phone case thickness of 1mm or less and the addition of Apple systems version 14 or later are sourced from the official help center, not the manual text.
- No name for this controller in the Bluetooth list or Bluetooth pairing steps were mentioned in the official source.